China OEM PLC UIU Pricelist –Silver Electrolytic Copper Expulsion Fuse – HolleyDetail:
Specifiche
Prodotto Tipo |
| EXPULSION FUSE CUT OUT, 27 kV, 150kVBIL, 100 A 8/12kA, 470MM Distanza di Creemage | EXPULSION FUSE CUT OUT, 38kV, 170kVBIL, 100A, 5/8 kA, 660mm CREEPAGE DISTANCE | EXPULSION FUSE CUTOUT, 27kV, 150kVBIL, 200A, 7.1/10 kA, 432mm CREEPAGE DISTANCE | |
NO. | Caratteristiche | Unità | Valore | Valore | Valore |
1 | BASE |
| |||
| Modello | Hv1 - 27/100 - 8 | Hv1 - 38/100 - 5 | Hv1 - 27/200 - 7.1 | ||
| Standard | ANSI/IEEE C 37.40/41/42 IEC60282 - 2: 2008 | ANSI C-37.40/41/42 and IEC60282-2 | ANSI/IEEE C37.40/41/42 y IEC60282-2:2008 | ||
| Corrente nominale | A | 100 | 100 | 200 | |
| Tensione nominale | kV | 27 | 38 | 27 | |
| Minimum Short Circuit Current | |||||
| - Simmetrico | kA | 8 | 5 | 7.1 | |
| - Asimmetrico | kA | 12 | 8 | 10 | |
| Livello di isolamento minimo: | |||||
| - Impulse withstand voltage (BIL), phase to ground and between phases. | kV | 150 | 170 | 150 | |
| - Withstand voltage at power frequency between phases, dry, 1 min. | kV | 60 | 80 | 60 | |
| - Withstand voltage at power frequency between phase and ground, in wet, 10s. | kV | 50 | 70 | 50 | |
| Insulating porcelain material of the base with high purity alumina compositions (between 94% to 99%) with the addition of vitrifiers. | SÌ | SÌ | SÌ | ||
| Minimum creepage distance (Phase-Earth) | mm | 470 | 660 | 432 | |
| Materiale di contatto | Silver electrolytic copper | Silver electrolytic copper | Silver electrolytic copper | ||
| - Minimum thickness of the top contact silver layer (tab) | µm | 15 | 15 | 15 | |
| - Maximum electrical contact resistance between each terminal and the nearest metal part accessible after contact | Ohm | 0.000099 | 0.000099 | 0.000099 | |
| - Upper contact pressure spring with fastening and alignment mechanism | Stainless steel, grade 304 according to AISI 304, DIN 1.4301 | Stainless steel, grade 304 according to AISI 304, DIN 1.4301 | Stainless steel according to AISI 304, DIN 1.4301 | ||
| Materiale dei terminali | Rame in scatola | Rame in scatola | Rame in scatola | ||
| -Conductor Range (Diameter) | mm | 4.11 - 11.35 | 4.11 - 11.35 | 4.11 - 11.35 | |
| -Terminals for use with copper or aluminum conductors | SÌ | SÌ | SÌ | ||
| - Tipo di terminali | Parallel slots, must include bolt, nuts and pressure washers made of stainless steel | Parallel slots, must include bolt, nuts and pressure washers made of stainless steel | Parallel slots, must include bolt, nuts and pressure washers made of stainless steel | ||
| Top support channel material | Galvanized structural steel | Galvanized structural steel | Galvanized structural steel | ||
| - Galvanized Material Standard | ASTM A575 | ASTM A575 | ASTM A575 | ||
| - Standard galvanizzante | ASTM A153 | ASTM A153 | ASTM A153 | ||
| - Minimum average thickness | µm | 86 | 86 | 86 | |
| Angolo di apertura minimo | 120 ° | 120 ° | 120 ° | ||
| Minimum number of mechanical operations guaranteed | NO. | 200 | 200 | 200 | |
| Minimum mechanical resistance of the horn for load operation | Dan | 200 | 200 | 200 | |
| Dimensions (See Figure 1) | |||||
| L | mm | 704 | 842 | 704 | |
| M | mm | 409 | 431 | 409 | |
| N | mm | 476 | 567 | 476 | |
| P | mm | 72 | 82 | 72 | |
| Q | mm | 131 | 147 | 131 | |
2 | Tubo del supporto a fusibile | ||||
| Caratteristiche | |||||
| - Standard | ANSI/IEEE C 37.40/41/42 | ANSI/IEEE C 37.40/41/42 | ANSI/IEEE C 37.40/41/42 | ||
| - Tensione nominale | kV | 27 | 38 | 27 | |
| - Corrente nominale | A | 100 | 100 | 200 | |
| - Minimum symmetrical/asymmetrical short-circuit current | kA | 8/12 | 5/8 | 7.1/10 | |
| - Internal diameter range | |||||
| - minimo | mm | 11.1 | 11.1 | 17.5 | |
| - massimo | mm | 18 | 18 | 23 | |
| - Length (allowable range) | mm | 375 ± 3 | 466 ± 3 | 375 ± 3 | |
| - Metal parts of joining with the base | Cast bronzo | Cast bronzo | Cast bronzo | ||
| - Fuse holder tube cover (top contact) | Silver electrolytic copper, with a minimum thickness of 8 um | Silver electrolytic copper, with a minimum thickness of 8 µm | Silver electrolytic copper, with a minimum thickness of 8 µm | ||
| - Eye hook for pole operation | Cast Bronze, with minimum mechanical resistance of 200daN | Cast Bronze, with minimum mechanical resistance of 200daN | Cast Bronze, with minimum mechanical resistance of 200daN | ||
| - Fuse holder tube material. | Fiberglass with internal coating in moisture-proof vulcanized fiber | Fiberglass with internal coating in moisture-proof vulcanized fiber | Fiberglass with internal coating in moisture-proof vulcanized fiber | ||
| - Fuse holder opening and closing mechanism (fuse holder base) | to avoid fuse holder tube un-alignment greater than 15mm | to avoid holder tube un-alignment no more than 15mm | to avoid fuse holder tube un-alignment no more than 15mm | ||
| Suitable for chicote fuses with removable head (Arc shortening rod) | SÌ | SÌ | SÌ | ||
3 | Correzione di accessori | ||||
| - Tipo di fissazione | Type B, according to ANSI/IEEE C37.42 | Type B, according to ANSI/IEEE C37.42 | Type B, according to ANSI/IEEE C37.42 | ||
| - Materiale | Acciaio zincato | Acciaio zincato | Acciaio zincato | ||
| - Standard di materiale | ASTM A575 | ASTM A575 | ASTM A575 | ||
| - Standard galvanizzante | ASTM A153 | ASTM A153 | ASTM A153 | ||
| - Minimum average thickness | µm | 86 | 86 | 86 |
Immagini dei dettagli del prodotto:
Guida del prodotto correlata:
We've numerous great employees customers excellent at promoting, QC, and working with kinds of troublesome difficulty inside the generation method forChina OEM PLC UIU Pricelist –Silver Electrolytic Copper Expulsion Fuse – Holley, The product will supply to all over the world, such as: Guatemala, Oman, Netherlands, We also provide OEM service that caters to your specific needs and requirements. With a strong team of experienced engineers in hose design and development, we value every opportunity to provide best products for our customers.
